> also...
>
> I figured out the mysql module error and the VirtualHost thing.
>
> I stopped the VirtualHost error by commenting out the first line of
> the /etc/apache2/sites-available/default file. This statement is
> loaded elsewhere. It now reads
>
> #NameVirtualHost *
> <VirtualHost *>
>
> To get rid of the mysql module error, I took the
> /etc/php5/apache2/php.ini file and edited out the load module line at
> the end. I did the same thing for the cli file. This module is loaded
> elsewhere because a phpinfo shows it.
>
> I have not poked around enough to figure out where these are already loaded.
>
> On Sat, Mar 21, 2009 at 11:22 AM, Tom Haynes <xxx@yyyy.org> wrote:
>> Thanks for the reply.
>>
>> I restarted ehcp, and got the logs below.
>>
>> checking apache syntax Syntax OK
>>
>> apache configde hata gorunmuyor... yukluyor.
>> Executing: /etc/init.d/apache2 reload * Reloading web server config apache2
>> ...done.
>>
>>
>> miscconfig:Array
>> (
>> [dnsip] => 75.xxxxxxx
>> [adminname] => xxx@yyyy
>> [adminemail] => xxx@yyyy.org
>> [ehcpdir] => /var/www/vhosts/ehcp
>> [banner] => this is banner.. you may write here somthing using <a
>> href="?op=options">server settings</a>
>> <br><br>
>> [defaulttemplate] => xp3
>> [defaultlanguage] => en
>> [updatehostsfile] => on
>> [messagetonewuser] => Dns servers for our server:
>> ...........
>>
>> (This will be sent to new users)
>> [backupdir] => /var/backup
>> [localip] => 10.1.10.103
>> )


>> localhost)
>> update complete
>> trying re-connecting to mysql db..
>> reconnect successfull.
>> Array
>> (
>> )
>> Array
>> (
>> )
>>
>>
>> ehcp V.0.25- Daemon loop number:1
>> -----------daemon suspended for 10 sec ---------
>> Array
>> (
>> )
>> Array
>> (
>> )
>>
>>
>> ehcp V.0.25- Daemon loop number:2
>> -----------daemon suspended for 10 sec ---------
>> Array
>> (
>> )
>> Array
>> (
>> )
>>
>>
>> ehcp V.0.25- Daemon loop number:3
>> -----------daemon suspended for 10 sec ---------
>> trying re-connecting to mysql db..
>> reconnect successfull.
>> Array
>> (
>> )
>> Array
>> (
>> )
>>
>>
>> ehcp V.0.25- Daemon loop number:4
>> -----------daemon suspended for 10 sec ---------
>>
>>
>> On Sat, Mar 21, 2009 at 9:56 AM, bvidinli <bvidinli@gmail.com> wrote:
>>> what is lines from /var/log/ehcp.log ?
>>>
>>> normally, ehcp does an apache2 restart only when a new domain added or
>>> syncdomains is issued.
>>>
>>> do
>>> /etc/init.d/ehcp restart
>>> then re-look at logs..
>>>
>>> see you
>>>
>>>
>>> On Sat, Mar 21, 2009 at 1:10 AM, <xxx@yyyy.org> wrote:
>>>> Tom haynes sent a message using the contact form at
>>>> http://www.ehcp.net/?q=contact.
>>>>
>>>> Hello...
>>>> I am wanting to move some personal domains from a hosting service to a
>>>> machine at home. I have tried a couple of things and like EHCP the most so
>>>> far. I have a couple of questions though.
>>>>
>>>> What does this mean in my logs?
>>>> [Fri Mar 20 18:50:26 2009] [notice] Apache/2.2.9 (Ubuntu)
>>>> PHP/5.2.6-2ubuntu4.1 with Suhosin-Patch configured -- resuming normal
>>>> operations
>>>> [Fri Mar 20 18:58:46 2009] [notice] Graceful restart requested, doing
>>>> restart
>>>> [Fri Mar 20 18:58:46 2009] [warn] NameVirtualHost *:0 has no VirtualHosts
>>>> PHP Warning: Module 'mysql' already loaded in Unknown on line 0
>>>>
>>>> Is the webserver supposed to restart every 8 min or so?

Restored from old drupal forum, for user uid:1 username:ehcpdeveloper
You may reset your password to access your new account here.

Merhaba,
elimden geldigince yardımcı olmaya çalışacağım,
normalde, en son versiyonu (0.29.06) sıfırdan, temiz bir ubuntuya kurunca direk çalışması lazım, sunucu ipsini doğru belirlemek kaydı ile....

1.
mydestination = mail.yyyyyyy.net, localhost, (gercek ip olmali)
yani email.yyyyyyy.net calismayabilir, zira varsayilan olarak mail... diye tanimli dnsde.. eger siz elle custom olarak email... tanimlamadi iseniz..

2.
php.ini de zaten hiçbirşeyle oynamanıza gerek yok. php nin sorun oluşturduğu hiç vaki olmadı.

3.
loglarınızda unknown user ver,
ehcp'de, domain oluşturup, üzerinde email kullanıcısı oluşturdunuz mu ?
evet ise, ya yeni versiyonu yeniden kurunuz, ya da, yeni classapp.php yi kurup, ayarlar/options bölümünde "fix mail configuration" tıklayınız.
hatta /etc/courier/authmysqlrc var mı, içi dolu mu bi bakın,
/etc/pam.d/smtp
bunlar olması lazım.
en iyisi enson versionu yeniden kurmak (zaten yapmadı iseniz.. )
ben sunucunuza bağlanarak da sorunu çözmeye çalışabilirim..

iyi çalışmalar...





2009/3/27 isim soyisim <xxxx@yyy.com>:
> Thank you for your interest,
> Firstly, i like ehcp and its clear installation. However, I do have a
> problem in PHP mail as many people have. I have spent googling many hours
> but could not find any solution. Also, I have made many configuration
> changes according to suggestions from some forums. The last situation is
> shown below. I will be happy to hear from you! Thanks.
>
> İlgi için teşekkürler.
> Öncelikle ehcp kurulumu oldukça kolay ve anlaşılır olmuş, teşekkürler.
> Yalnız, birçok kişide olduğu gibi PHP-mail kısmında sorun yaşadım.
> İnternette saatlerce google'da arayarak bu sorunu çözmeye çalıştım. Birçok
> da ayar değiştirdim ama yine de başarılı olamadım. Son durum aşağıda.
>

> 10.0.0.1 modem - 10.0.0.10 server [adelante] - and my computer
> Panel User count:3 [xxxxxx.com - admin - ehcp]
> Domain Count:1 [xxxxxx.com]
> FTP users count:1 [xxxxxx.com]
> Email users count:1 [iletisim@xxxxxx.com]
>
> CHANGES ----------------------------------------------------- DEĞİŞİKLİKLER
>
> 1. sudo nano /etc/postfix/main.cf
> mydestination = email.yyyyyyy.net, localhost, 10.0.0.10
> relayhost = smtp.yyyyyyy.net
>
> 2. sudo nano /etc/php5/apache2/php.ini
> SMTP = adelante
> smtp_port = 25
> sendmail_path = /usr/sbin/sendmail -i -t
>
> RESULTS ----------------------------------------------------- SONUÇLAR
>
> 1. nano /var/log/mail.log
> Mar 27 01:32:39 adelante postfix/master[4748]: reload configuration
> /etc/postfix
> Mar 27 01:32:39 adelante postfix/master[4748]: reload configuration
> /etc/postfix
> Mar 27 01:33:35 adelante postfix/pickup[6227]: 30DB416C12D: uid=33
> from=<www-data>
> Mar 27 01:33:35 adelante postfix/cleanup[6242]: 30DB416C12D:
> message-id=<20090326233335.30DB416C12D@adelante.localdomain>
> Mar 27 01:33:35 adelante postfix/qmgr[6229]: 30DB416C12D:
> from=<www-data@xxxxxx.com>, size=325, nrcpt=1 (queue active)
> Mar 27 01:33:35 adelante postfix/pickup[6227]: 393DA16C12A: uid=33
> from=<www-data>
> Mar 27 01:33:35 adelante postfix/cleanup[6242]: 393DA16C12A:
> message-id=<20090326233335.393DA16C12A@adelante.localdomain>
> Mar 27 01:33:35 adelante postfix/qmgr[6229]: 393DA16C12A:
> from=<www-data@xxxxxx.com>, size=328, nrcpt=1 (queue active)
> Mar 27 01:33:35 adelante postfix/pickup[6227]: 456AF16C12B: uid=33
> from=<www-data>
> Mar 27 01:33:35 adelante postfix/cleanup[6242]: 456AF16C12B:
> message-id=<20090326233335.456AF16C12B@adelante.localdomain>
> Mar 27 01:33:35 adelante postfix/qmgr[6229]: 456AF16C12B:
> from=<www-data@xxxxxx.com>, size=689, nrcpt=1 (queue active)
> Mar 27 01:33:42 adelante postfix/smtp[6252]: 393DA16C12A:
> to=<xxxx@yyy.com>,
> relay=smtp.yyyyyyy.net[208.109.80.149]:25, delay=7.4,
> delays=0.06/0.01/6.8/0.43,
> dsn=5.0.0, status=bounced (host
> smtp.yyyyyyy.net[208.109.80.149] said: 553
> http://www.spamhaus.org/query/bl?ip=85.101.101.73 (in reply to RCPT
> TO command))
> Mar 27 01:33:42 adelante postfix/cleanup[6242]: B742616C14B:
> message-id=<20090326233342.B742616C14B@adelante.localdomain>
> Mar 27 01:33:42 adelante postfix/qmgr[6229]: B742616C14B: from=<>,
> size=2247, nrcpt=1 (queue active)
> Mar 27 01:33:42 adelante postfix/bounce[6254]: 393DA16C12A: sender
> non-delivery notification: B742616C14B
> Mar 27 01:33:42 adelante postfix/qmgr[6229]: 393DA16C12A: removed
> Mar 27 01:33:42 adelante postfix/virtual[6257]: B742616C14B:
> to=<www-data@xxxxxx.com>,
> relay=virtual, delay=0.06, delays=0.04/0.01/0/0.01, dsn=5.1.1,
> status=bounced (unknown user: "www-data@xxxxxx.com")
> Mar 27 01:33:42 adelante postfix/qmgr[6229]: B742616C14B: removed
> Mar 27 01:33:45 adelante postfix/smtp[6253]: 456AF16C12B:
> to=<yyyyyyy@hotmail.com>,
> relay=smtp.yyyyyyy.net[208.109.80.149]:25, delay=10,
> delays=0.06/0.01/9.8/0.42,
> dsn=5.0.0, status=bounced (host
> smtp.yyyyyyy.net[2

if you cannot login using admin and the password that you defined while you install:

Cause: You forgot or you provided it wrong while install,

Solution:
to reset your admin password:
go to your phpmyadmin, login your mysql user and pass,
go to panelusers table, brows,
edit user admin
set password using function md5
save


if you dont know your ehcp mysql pass,
try looking at config.php in ehcp dir

if that not works, try mysql root password recovery, http://www.ehcp.net/?q=node/160
if not helps, then re-install ehcp


Another way to solve: http://ehcp.net/?q=node/539
http://www.ehcp.net/helper/yardim/cat.php?cid=11&qid=46
http://www.ehcp.net/?q=node/591


Restored from old drupal forum, for user uid:1 username:ehcpdeveloper
You may reset your password to access your new account here.

Helllo,

First of all: I like this pack!
I have a problem.
After installation o try to login in to the administration paneel.
But i see a white page!

I have ehcp install on ubuntu server 8.10
Can you help ?

Sorry for the very bad english.


Pb

Restored from old drupal forum, for user uid:1870 username:pieterbas16
You may reset your password to access your new account here.

Hi there:

I got the following error after trying to erase an email forgarding:

Some Error Occured.
Error Occured (source:Error (executequery: delete from forwardings where (reseller='pcskynet' or panelusername='pcskynet') and id=1))err: Unknown column 'reseller' in 'where clause'last db error:Unknown column 'reseller' in 'where clause'


List Email forwardings

Some Error Occured.
failedlast db error:Unknown column 'reseller' in 'where clause'


Tried as user or admin. Same error.

Please Advice.

Restored from old drupal forum, for user uid:1055 usernamekynet104
You may reset your password to access your new account here.

Hello! Thank you for your efforts on ehcp. I am having a problem though. i have created a subdomain, and am getting a page load error on the subdomain. http://domain.com works fine. however http://subdomain.domain.com gives an address not found error.

Please help.

thank you
willieray

Restored from old drupal forum, for user uid:1775 username:willieray25
You may reset your password to access your new account here.

Hi,

After upgrading to 0.29.04, when I add an email user, the password is stored in clear text in the database and the user can't login.
I used a hash from another user and it works, but I don't know what type of hash it is, so I can't change the password.

Can you help me with this problem?

Restored from old drupal forum, for user uid:700 username:deconectat
You may reset your password to access your new account here.

I started getting this error, due to this apache2 can not start.

Please advice.

Restored from old drupal forum, for user uid:1055 usernamekynet104
You may reset your password to access your new account here.

Good Morning.

I had installed ehcp on my machine before, but i had reinstalled the OS and i installed ehcp again.
But now i'm having a problem. Everytime i login on ehcp i get one warning:
<code>Attention!
ehcp daemon not running !
Please run it from command/line by:
sudo /etc/init.d/ehcp start
root@r17344:~# sudo /etc/init.d/ehcp start</code>

I typed sudo /etc/init.d/ehcp start and i get an error.
The error started with "cant connect to mysq" (it wasnt mysql). I don't know very well. And after that have the other code that i will post bellow (starting ehcp.. starting ehcp_daemon.py..)

So i typed "hostname my-hostname" and rebooted the machine.
I tried again sudo /etc/init.d/ehcp start and i get this:

<code>
starting ehcp..
starting ehcp_daemon.py
root 3804 0.0 0.2 2720 1184 ? S 14:24 0:00 /bin/bash /var/www/vhosts/ehcp/ehcpdaemon2.sh
root 3864 0.0 0.2 2512 1060 pts/0 S 14:25 0:00 /bin/bash /var/www/vhosts/ehcp/ehcpdaemon2.sh
root 3958 0.0 0.2 2512 1060 pts/0 S 14:25 0:00 /bin/bash /var/www/vhosts/ehcp/ehcpdaemon2.sh
root 3983 0.0 0.2 2512 1060 pts/0 S 14:25 0:00 /bin/bash /var/www/vhosts/ehcp/ehcpdaemon2.sh
root 4008 0.0 0.2 2512 1060 pts/0 S+ 14:25 0:00 /bin/bash /var/www/vhosts/ehcp/ehcpdaemon2.sh
root 3817 0.1 2.1 23152 10420 ? S 14:24 0:00 php index.php daemon
root 3865 1.5 2.1 23156 10420 pts/0 S 14:25 0:00 php index.php daemon
root 3959 3.0 2.1 23156 10420 pts/0 S 14:25 0:00 php index.php daemon
root 3984 6.0 2.1 23156 10420 pts/0 S 14:25 0:00 php index.php daemon
root 4009 0.0 1.3 19772 6212 pts/0 R+ 14:25 0:00 php index.php daemon
root 3802 1.0 1.7 110932 8452 ? Sl 14:24 0:00 python /etc/init.d/ehcp_daemon.py
root 3956 6.0 1.6 20336 8044 pts/0 S 14:25 0:00 python /etc/init.d/ehcp_daemon.py
root 3981 11.5 1.6 20336 8044 pts/0 S 14:25 0:00 python /etc/init.d/ehcp_daemon.py
root 4006 0.0 0.9 6908 4388 pts/0 R+ 14:25 0:00 python /etc/init.d/ehcp_daemon.py
</code>

But when i login i have the same warning.
Can you help me?

Restored from old drupal forum, for user uid:1106 username:guilhermecardoso
You may reset your password to access your new account here.

Hi,

I'm having a problem with easy install scripts. Everytime i go there, i get this:
<code>Some Error Occured.
Error Occured (sourcetablolistele_3_5_4))err: queryelect scriptname,homepage,description from scripts Unknown column 'homepage' in 'field list'last db error:Unknown column 'homepage' in 'field list'

Select script to install:
Unknown column 'homepage' in 'field list'</code>

Is there anyway to fix this?

Cheers

Restored from old drupal forum, for user uid:1106 username:guilhermecardoso
You may reset your password to access your new account here.