Hi, I have just setup EHCP for my hosting company and I would like to know how I can change the image on the default login page for EHCP.

Please could someone direct me in the right direction.

Thanks

Restored from old drupal forum, for user uid:4182 username:lewismichaelbbc
You may reset your password to access your new account here.

I was so desperate with this problem,
I made ​​a ehcp hosting, and it addresses the login panel,
http://220.247.174.218/ehcp/
but when I access my ip http://220.247.174.218 always appear this message.
================================================== ==========
Default Web Site Page


If you feel you have reached this page in error, please contact the web site owner.
Click here for the control panel on your server!

If you are the web site owner, it is possible you have reached this page because:

The IP address has changed.
There has been a server misconfiguration.
The site may have been moved to a different server.
You account is blocked.
If you are the owner of this website and were not expecting to see this page, please contact your hosting provider.
================================================== ==========

how do i change the login panel ehcp address, from http://220.247.174.218/ehcp/ be http://mydomain.com/ehcp/

Restored from old drupal forum, for user uid:4427 username:dewakomputer
You may reset your password to access your new account here.

I am not sure if this is best way, but, an experience:

Dear EHCP DEVEL,
first of all congratulations for your fantastic work...

im having some problem with the folder permissions....
i have installed joomla 1.7 via the script installer...all work fine but i cant install any template or module....
i have googled around but didnt find any good solution....everyone say to set 777 how permission but we know that is a bad idea....how can i solve this ? Thanks. Antonio
Tue, Nov 1 2011 1:55am - Ehcp developer
if you are installing template/module through joomla web interface, then, you have to give 777 permission to "some" joomla folders. I dont know which folder, but you need to give that to folders required by joomla. Of course, it is a bad idea to give 777 to ALL folders.
Tue, Nov 1 2011 1:56am - Ehcp developer
please also post "which folders required to give perm" so that we can include them in ehcp installer.
Tue, Nov 1 2011 4:48am
hi, i have solved now just installing suphp
amd adding this in the apache template of the domain


AssignUserId USER GROUP


in this way i have not to set 777 to the folders...

i hope to help someone other
still congratulation dudes!


< IfModule mpm_itk_module >
AssignUserId vsftpd root
< / IfModule >

Restored from old drupal forum, for user uid:1 username:ehcpdeveloper
You may reset your password to access your new account here.

Hello!
Is there an Approved ssl certificates in ehcp control panel that you can use on their website?

/ Force

Restored from old drupal forum, for user uid:2253 username:forcevision
You may reset your password to access your new account here.

Hello,

I have installed whmcs on my server and i need to run a cron job like this:
php -q /var/www/vhosts/my.website.com/my.website.com/httpdocs/admin/cron.php escalations

but i received this error while runing:

site error: the file <b>/var/www/vhosts/my.website.com/my.website.com/httpdocs/admin/cron.php</b> requires the ionCube PHP Loader ioncube_loader_lin_5.2.so to be installed by the site administrator.root@ehcp:/var#

please help me to solve this problem

Restored from old drupal forum, for user uid:2771 username:cameron
You may reset your password to access your new account here.

Hello
First of all thanks for this great Control Panel.
I used kloxo and vitualmin as free. Virtualmin is a bit complex and installing is hard. Maybe kloxo has more option and practical but just working centos and i want to support ehcp.

I have linux vps. It use hypervm for virtualization. it has control panel for vps. I use for reinstall, reboot, filemanagement etc. Also has dns option.
First question
My vps company give me dns server record ns1,ns2.

I have just made some tests . I have 2 way to make dns record
one of them is record my vps ip to my domain(ehcp and ubuntu working dnsserver) second is recording hypervm dns to my domain.

I have 5 domains. Firstly i have recorded vps company's dsn like ns1.blabla.com in to my domain registery and i add domain in ehcp. So it work but when i added subdomain it didnt work. secondly i registered subdomain to hypervm dns tools and subdomain worked.

But if i use recording my ip to directly my domain
domain and subdomain is working without hypervm dns record. That means if you use hypervm dns server you cant use your ehcp dns server. well quesiton is if i change dns template {dnsip} and write my hypervm dns in option of edit dns template for this domain it is work for domain and subdoimains?

Second question
I had just one ip and i added second ip. When i look ehcp in options there is record of dnsip and singleserverip.

I revise with new ip and all domain is doest work. i think because of all dns and apache record are old ip.

I want to using ips for each domains as seperate. i look dns template and there are {dnsip}{webip}{mailip} also apache template has {webserverip}.All of them is default and just for one ip.

So to change some domain ip, must i change {dnsip}{webip}{mailip} ? Is there any practical solution? maybe add second default ips like {dnsip2} {wepip2} etc or option of choosing ip for each domains


Bu arada Türküm ama herkes faydalansın diye ingilizce yazdım. Cevabınız için şimdiden teşekkür ederim.

Restored from old drupal forum, for user uid:4226 usernameiella
You may reset your password to access your new account here.

thanks to: Brian Chabot:
I wasn't sure where this should go... Feel free to add it to the
documentation.

You can see it at work (for about the next day or so...) at
http://bctest.c4i.me/ (or till I break it...)
The test site is identical in most ways to http://indiebandwebsites.com/
but runs nginx.

----- Feel free to share the below parts - no attribution necessary
-----

Here's my work-around for getting permalinks to work right in nginx and
WordPress using EHCP:

1. Change apachetemplate.nginx to read:
-------------cut-----------
# this file used in Easy Hosting Control Panel (ehcp), www.ehcp.net
# webserver config file for nginx webserver
# This version is meant to work right with WordPress and the
# nginx compatibility plugin.

server {
listen 80;
server_name {domainname} www.{domainname};

access_log {homedir}/logs/access_log;
error_log {homedir}/logs/error_log;
access_log /var/log/apache_common_access_log;
error_page 404 = @wordpress;
log_not_found off;
root {homedir}/httpdocs;
index index.php index.html index.htm;

location ^~ /files/ {
rewrite /files/(.+) /wp-includes/ms-files.php?file=$1
last;
}

location @wordpress {
fastcgi_pass 127.0.0.1:9000;
fastcgi_param SCRIPT_FILENAME $document_root/index.php;
include /etc/nginx/fastcgi_params;
fastcgi_param SCRIPT_NAME /index.php;
}

location ^~ /blogs.dir/ {
internal;
root /path/to/blog/wp-content;
}

location ~ \.php$ {
try_files $uri @wordpress;
fastcgi_index index.php;
fastcgi_pass 127.0.0.1:9000;
fastcgi_param SCRIPT_FILENAME
$document_root$fastcgi_script_name;
include fastcgi_params;
}

location ~ /\.ht {
deny all;
}

}
-------------cut-----------

2. Use the "nginx Compatibility" plugin for PHP5:
http://wordpress.org/extend/plugins/nginx-compatibility/
- Install plugin but DO NOT activate it on install (that would activate
the PHP4 version.)
- Go into the plugins directory and activate the php5 version manually.

Done. You can now use permalinks other than the default.

Restored from old drupal forum, for user uid:1 username:ehcpdeveloper
You may reset your password to access your new account here.

just make sure ehcp->options->edit->dynamic ip is checked.

the reason for such service (dyndns):
there should be a static entry point in dns resolution chain. for ex:

stage 1 -> 2 -> 3 -> 4 -> 5
root dns servers->.com registrar->your registrar->a dns of your choise (with static ip)-> maybe another dns

normally, stage 4 is your server. however, if your server has no static ip, you have two choice:
a)update your registrar database each time your ip changed; which is very non-practical; and mostly cannot be automated.
b) redirect your domain in stage 4 to dyndns-like service (which has static ip), and put dyndns client on your server, this way, dyndns will accept dns requests, will update ip when necessary (the thing that cannot be automated in case a), then redirect all dns requests to your server to stage 5. In this case, dyndns acts as a dns proxy, or dns gateway, or registrar, which CAN update IP of your server.

If you had a static ip in your server, stage 5 is not needed, and your server would be at stage 4.

I hope these are explanatory.
this is really a hard-to-understand topic, for many people.
(I will post this explanation to ehcp.net too)
- Hide quoted text -




On Wed, Jun 1, 2011 at 9:05 AM, Eric xxx <earnolxxx@gmail.com> wrote:

Also, do I need to activate any settings within EHCP to get it to monitor IP address changes, or does it do it automatically.

Let me know.
~
Thanks


On Tue, May 31, 2011 at 1:45 PM, Eric xxx <earnolxxx@gmail.com> wrote:

Also, check this out:

http://forums.devshed.com/dns-36/dns-template-help----adding-ns-and-a-records-819767.html

If bind is updated and I set my DNS template time lower, it could cause less than one minute of downtime as the IP is updated?


On Tue, May 31, 2011 at 2:39 PM, Eric xxx <earnolxxx@gmail.com> wrote:

Thanks for the info!

I'm not sure I understand completely why I'd have to route through DynDNS.Won't my domains be redirected to my new IP anyways since my name servers are ns3.mydomain.com and ns4.mydomain.com, and the associated hosts are defined in DNS on my server?If Bind is updated properly, they'd reach my server even if my IP changes, correct?If not, could you please explain it further for me, as I'm confused about how dynamic DNS works.It seems to me that Dynamic DNS creates name servers for you which link to your server's current IP address.If the IP address changes, so are the name servers.But would my Dyn DNS url of test.dyndns.org respond to ns1 - ns4.test.dyndns.org since I have the host entries created in Bind?

Not sure how this works.Very confused


On Tue, May 31, 2011 at 2:08 PM, ehcpdeveloper <info@ehcp.net> wrote:

yes, ehcp can monitor IP change, and update bind config accordingly,
however, you still need dyndns, because you need to redirect your
domains to somewhere (this case, dyndns servers, or similar)
install dyndns client also on your server.

In future, we have plans to to offer dyndns directly in ehcp fully,
without need to an external dyndns service.


On Tue, May 31, 2011 at 10:03 PM, Eric xxx
<earnolxxx@gmail.com> wrote:
> Hey ehcpdeveloper,
>
> What would you recommend I do for my DNS since I have a dynamic IP?I was
> going to buy a static IP from Comcast, but when they asked for $15 a month,
> I nearly threw up.
>
> I don't know if I really need Dynamic DNS service, as I already have a Bind
> server installed.Couldn't I configure Bind to check if my IP changes and
> automatically update the {dnsip) variable in the DNS template files?Does
> EHCP monitor IP changes?Does it automatically update the server IP option?
>
> What would you suggest?
> --
> Thanks

Restored from old drupal forum, for user uid:1 username:ehcpdeveloper
You may reset your password to access your new account here.

to connect to a local db, just use "localhost" as mysql host
to connect to a remote db, use remote ip (real external ip of server)

however, to connect to a mysql from remote, you need to do some settings in mysql.
open my.cnf,
bind-address = 127.0.0.1, 88.33.44.55 (your external real ip)
after that, you need to give your user to connect from outside mysql server.

open mysql console (or do in phpmyadmin, privileges)
grant all privileges on db.* to user@'yourip' identified by 'pass';
flush privileges;

(if you have firewall, you need to open port 3306)

Restored from old drupal forum, for user uid:1 username:ehcpdeveloper
You may reset your password to access your new account here.

I added only one domain name to ehcp on a virtual private server and it works fine, but I recently added another one, and I used the same exact settings as the previous one, and it will only go to the ehcp control panel. Is there a setting for the newly added domain soit will go to the index.html file inside its folder? Thanks!

Restored from old drupal forum, for user uid:3801 username:iconus
You may reset your password to access your new account here.