Hello.

I have just install ehcp and everyting works fine. The day after I installt ehcp and typ the ip number for the server ehcp dont respond. Ihave the same ip number as it used all the time but now it dont respond what have I done wrong ?

/Force

Restored from old drupal forum, for user uid:2253 username:forcevision
You may reset your password to access your new account here.

Hi,

I am at this moment just installed and configured ehcp in one of my servers and it is working fine. I got two more servers running apache. Is it possible my first server with ehcp installation to manage domain hostings and email account om my other two more servers.

If it is possible, can you guide me how

Thanks

Restored from old drupal forum, for user uid:1619 username:myka
You may reset your password to access your new account here.

Hi there, As I already saw this is a very cool software!
I want to kindly ask something. I installed the EHCP to an Ubuntu server (like the HOWTOForge) and everything is ok. I dont have a real domain name. I want to use it to my intranet (school) but I want to see and administer also via a DYNDNS account through internet.
I am confused about the Domain names (in my case there isn't any) and with FTP, mail server, etc.
Is it any Howto for installations like I described?
Please advice...
By the way... the installation script for Joomla is for 1.5.4 Is it any way to place the 1.5.9. version?

Thanks


Restored from old drupal forum, for user uid:1665 username:pras
You may reset your password to access your new account here.

Hi,

I have install your EHCP, how could I modify the statement below - I mean what file to edit to modify the statement.

Thanks

Under Construction

This site is hosted on an EHCP server, www.ehcp.net, ehcp is a hosting control panel for ubuntu,
To change this, Upload your files inside httpdocs folder using ftp.






Restored from old drupal forum, for user uid:1619 username:myka
You may reset your password to access your new account here.

Hello,

I have installed EHCP three times, with the regard that i have done the installation incorrect. I have run the installation with the correct passwords and verified by utilizing the: mysql -u root -p and the password and pasting the information from the configuration file. The login is a complete success; however when administrating the backend of EHCP it tells me that i cannot connect to the host. (As verified in: /var/www/vhosts/ehcp/config/adodb/drivers/adodb-mysql.inc.php )

My next step was to log into MYSQL utilizing phpmyadmin to see if i did something wrong, and the database reads the following: EHCP(0) and EHCPBackup...(0).

Are there any work around this? I have even lowered the security temporarily to see if the installation would work, and nothing seems to be working. Any and all help would be much appreciated.

Kindest Regards,
Anthony.

Restored from old drupal forum, for user uid:997 username:Anthonyx86
You may reset your password to access your new account here.

Question:
Hello,

I am attempting to create my very first server ever. I eventually wish to host multiple websites for my close family. Please keep in mind I am an Ubuntu novice and server newb. I have clean installed Ubuntu server with SSH being the only installed package a number of times. This part has always installed flawlessly. The first couple of times I immediately installed EHCP. This resulted in no success. I'm not exactly sure why, but I assume that I had not truly understood the process of password selection during installation, not to mention the fact that I had not installed EHCP while logged in as Administrator.

The next time I paid extra close attention to my selection of passwords during the EHCP installation process, but still no luck. Rather than reinstalling yet again I tried a number of different username/password combinations only to discover that none of the passwords chosen during installation were being used. I was able to log into EHCP, PHPMyAdmin but only with the default usernames and passwords. I also discovered that MYSQL was not running even though it had been installed. Again EHCP was not installed while logged in as an Administrator.

I then found "Easy install of server with EHCP" at http://www.ehcp.net/?q=node/258 and I am trying to follow the instructions to the letter. I can log in to Ubuntu server, which is named simply "server" with the username:tunda and password:1234 created during this test install, I then run sudo su to become administrator. I enter my password:1234 that was used during Ubuntu server install when prompted and I now see root@server:/home/xxxx#. This leads to my first question, am I now logged in as administrator?

Still using CLI, I run sudo passwd root and I'm prompted to Enter new UNIX password: and then Retype new UNIX password: which results in passwd: password updated successfully, but this appears to do nothing. Maybe I do not know where this password is to be used. I thought this would change the password required to log in after the sudo su command, but even after reboot I must use password:1234 after the sudo su command and I cannot seem to find a single area where this password is accepted. Could you please tell me if I have made a mistake in this process or could you please inform me where to use this password that I have created.

I would like to know if I set up my /etc/hosts file correctly. In the following example the computer running Ubuntu server is simply named "server", and will be used with www.xxxx.com as the hosting domain name.
127.0.0.1 localhost.server localhost
192.168.0.100 server.xxxx.com server
Is this a legit setup? If not what changes need to be made to make it legit? What are the variable options that are simply an Administrator's preference?

Other than this everything listed in the instructions prior to EHCP installation appears to work perfectly. If you could please clarify these 3 issues for me I would greatly appreciate your time and help. Thank you!


Answer:
Your /etc/hosts is ok.

sudo passwd root,
su, then, passwd,
"Enter new Unix passord",
etc
are all, only for changing root pass of ubuntu, which is unknown at installation of ubuntu.
after changing root pass, you know that, and you can easily run commands after entering "su" command.
Otherwise, you should do "sudo command" for every command you enter...

To install ehcp, you should folow instructions at http://www.ehcp.net/helper/yardim/cats.php
the link you said is also an explanation, but it is written by thelen, and a bit complex

basicly,
install ubuntu,
then,
sudo passwd (this only resets your root pass)
then
download ehcp
extract it
run install.sh
thats all

in Linux world, super user is root, what you call is Administrator; Administrator is on windows, and is meaningless in Linux,
to install ehcp, you need to become root (superuser) by saying su, or, you may run install.sh as "sudo install.sh"

hope this helps...



Restored from old drupal forum, for user uid:1 username:ehcpdeveloper
You may reset your password to access your new account here.

Hi,

I have ubuntu 8, just installed fresh (3 attempts now)

I run the ehcp process, all is fine and dandy, but at the end it says, opening firefox to my CP area but firefox opens the url : http://localhost/vhosts/ehcp/

with the page error :

" The requested URL /vhosts/ehcp/ was not found on this server. "

If I try just http://localhost, there seems to be an active apache2 atleast as i get basic 'Under/Con' text on what seems a simple html page, so web server is active!

Can anyone help, again this is my 3rd attampt from a formated PC/Ubuntu then ehcp install method of doing this, maybe my steps are wrong, tho it does tell me to make cupa and sit back, best install i ever seen in linux yet for such a complex program&dependys!



Restored from old drupal forum, for user uid:1396 username:jeffburton
You may reset your password to access your new account here.

[12:44] alias: hi, i would want to install ehcp on a vps (ubuntu 8 - hypervm), is their an installation guide on the web wich i could use?

[12:56] bvidinli: http://www.ehcp.net/?q=node/153
[12:56] bvidinli: look at here
[12:56] bvidinli: you may install easily i think.
[12:57] bvidinli: follow on screen instructions after launching ehcp install
[12:58] elias: I do it after setting up the LAMP server on ubuntu? (wich has to include php, mysql, .....) or does ehcp tat automatic?
[12:59] bvidinli: it does automatic
[12:59] bvidinli: you need only basic ubuntu
[12:59] bvidinli: no other software
[12:59] elias: ok thanx for the information .
[13:00] bvidinli: you may install minimal, basic debian or ubuntu server/desktop with no software on it, only ssh....
[13:00] bvidinli: or if local server, no ssh too.
[13:00] elias: i'll chose for ubuntu 8.04 server edition
[13:00] bvidinli: if remote, you cant reach without ssh..
[13:00] elias: i have the ssh from hypervm i suppose
[13:00] elias: because it's a vps
[13:01] bvidinli: if you install server editiobn, dont install any server related software, with server, such as mail, lamp etc...
[13:01] bvidinli: because ehcp does it itself...
[13:02] elias: are their important things i have to know when i install on a vps? like the eth0 network configuration .. ?
[13:04] bvidinli: a few basic things..
[13:05] bvidinli: as order of things:
[13:05] bvidinli: 1- setup your vps, with network connection, basic setup,
[13:05] bvidinli: make sure your vps sees internet, can browse pages... or can reach internet
[13:06] bvidinli: 2- you may install ehcp, after setup your vps/server and setting network ...
[13:06] bvidinli: 3- to let outside world reach your server, you need to redirect outside requests to your inside vps server
[13:06] bvidinli: thats all.
[13:07] bvidinli: i will prepare a detailed installation instructions later...


Restored from old drupal forum, for user uid:1 username:ehcpdeveloper
You may reset your password to access your new account here.

check that you have following files:
lrwxrwxrwx 1 root root 27 2008-12-29 10:29 php5.conf -> ../mods-available/php5.conf
lrwxrwxrwx 1 root root 27 2008-12-29 10:29 php5.load -> ../mods-available/php5.load

in your dir: /etc/apache2/mods-enabled

and check that the file /etc/apache2/mods-enabled/php5.conf contains like:

<IfModule mod_php5.c>
AddType application/x-httpd-php .php .phtml .php3
AddType application/x-httpd-php-source .phps
</IfModule>


Restored from old drupal forum, for user uid:1 username:ehcpdeveloper
You may reset your password to access your new account here.

some ehcp installs shows errors like:

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "tr_TR.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory



perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "tr_TR.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").





This prevents mysql from working, hence, ehcp cannot be installed..
i dont know the cause for this, but this is an issue...
any idea ?

solution in http://ubuntuforums.org/showthread.php?t=934357&highlight=locales

solution: apt-get install language-pack-en

Restored from old drupal forum, for user uid:1 username:ehcpdeveloper
You may reset your password to access your new account here.