04-14-2023, 10:12 PM
if your apache still not working,
this should be the error related:
98)Address already in use: make_sock: could not bind to address 216.18.22.101:80
no listening sockets available, shutting down
Unable to open logs
That means:
1- stop apache, /etc/init.d/apache2 stop
2- make sure no other apache instance or any other server that uses port 80 running, to check that, netstat -anp | grep tcp | grep 80
3- it says, unable to open logs. i suggest you to reset all apache/ehcp config files, so that, you may find at which point you get that error, to do that, follow http://ehcp.net/?q=node/771#comment-1177
4- ehcp debug page may also help you: http://ehcp.net/?q=node/771
in fact, you have a simple log dir problem. a directory exists in your configs, but not in system ... Maybe if there is an option of apache that creates those dirs automatically, that would be good..
hope those help..
On Wed, Dec 9, 2009 at 5:54 AM, > wrote:
> apache2/error.log attached
>
>
> ----- Original Message ----
> From: ehcp.net <info@ehcp.net>
> To: >
> Sent: Tue, December 8, 2009 8:43:02 PM
> Subject: Re: SSL Apache
>
> here is key point:
>
> executing command: /etc/init.d/apache2 restart
> (escapedcmd: /etc/init.d/apache2 restart)
> * Restarting web server apache2
> ...fail!
>
> please send also /var/log/apache2/error.log
>
> or let me in into your server by ssh.
> something is wrong in your configs or system.
> Most probably, some of your directories do not exist in your syste,
> which are configured in apache,
> apache tries to find those dirs, and give error if it cannot find.
>
>
>
> On Wed, Dec 9, 2009 at 2:20 AM, > wrote:
>> Dear ehcp.net;
>>
>> I checked the logs and no certificated configured error. I have attached the logs for your review. I hope this helps you with apache ssl routnes.
>>
>> How do I configure a ssl certificate or does your routine automatically configure it?
>>
>>
>>
>>
>> ----- Original Message ----
>> From: ehcp.net <info@ehcp.net>
>> To: >
>> Sent: Mon, December 7, 2009 8:09:33 AM
>> Subject: Re: SSL Apache
>>
>> ehcp has link in options->"fix apache config with ssl"
>> this makes a quick&dirty setup, which generates a self-signed
>> certificate, then use that in apache configs.
>> That command make necessary changes in all ehcp config files related
>> to apache(apachetemplate and so on), then, applies that config to
>> apache, then reload apache. You can see exact list of operations done
>> in install_lib.php
>>
>> If something went wrong with your case, you need to check out the logs
>> as described in http://ehcp.net/?q=node/771
>> if you are not able to open https://yourserverip, then, most probably
>> something is wrong in apache configs.. you need to check errors in
>> logs, especially syslog and apache2/error.log
>> I cannot give more info unless I see those logs..
>>
>>
>> I may also try to help you by connecting to your server by ssh.
>>
>> I am sory about those many banners/ads. I will remove them as much as
>> I can. as you saw, I made login page quite clear with version 0.29.12
>> As somebody says, i think to leave a small "donate" button.. or just
>> like wikipedia, "Wikipedia is a non-profit project: please donate
>> today."
>>
>> see you,
>>
>>
>> On Mon, Dec 7, 2009 at 1:09 PM, wrote:
>>> Dear bvidinli;
>>>
>>> I downloaded your panel and it is excellent except for the banners which I will edit later. I am willing to keep some of them because they might help customers, however the hosting ads are not appropriate in the context of my company providing these services as well.
>>>
>>> I tried using your ssl appache setup but was not able to open anything with Firefox latest version. Any ideas as to what this could actually be? I believe your ssl setup generates an internal ssl or self generated ssl certificate. What does the user have to do in order to access the sight. I am using Ubuntu 9.10 latest version. I cannot open anything on my server.
>>>
>>> Sincerely,
>>>
>>>
Restored from old drupal forum, for user uid:1 username:ehcpdeveloper
You may reset your password to access your new account here.
this should be the error related:
98)Address already in use: make_sock: could not bind to address 216.18.22.101:80
no listening sockets available, shutting down
Unable to open logs
That means:
1- stop apache, /etc/init.d/apache2 stop
2- make sure no other apache instance or any other server that uses port 80 running, to check that, netstat -anp | grep tcp | grep 80
3- it says, unable to open logs. i suggest you to reset all apache/ehcp config files, so that, you may find at which point you get that error, to do that, follow http://ehcp.net/?q=node/771#comment-1177
4- ehcp debug page may also help you: http://ehcp.net/?q=node/771
in fact, you have a simple log dir problem. a directory exists in your configs, but not in system ... Maybe if there is an option of apache that creates those dirs automatically, that would be good..
hope those help..
On Wed, Dec 9, 2009 at 5:54 AM, > wrote:
> apache2/error.log attached
>
>
> ----- Original Message ----
> From: ehcp.net <info@ehcp.net>
> To: >
> Sent: Tue, December 8, 2009 8:43:02 PM
> Subject: Re: SSL Apache
>
> here is key point:
>
> executing command: /etc/init.d/apache2 restart
> (escapedcmd: /etc/init.d/apache2 restart)
> * Restarting web server apache2
> ...fail!
>
> please send also /var/log/apache2/error.log
>
> or let me in into your server by ssh.
> something is wrong in your configs or system.
> Most probably, some of your directories do not exist in your syste,
> which are configured in apache,
> apache tries to find those dirs, and give error if it cannot find.
>
>
>
> On Wed, Dec 9, 2009 at 2:20 AM, > wrote:
>> Dear ehcp.net;
>>
>> I checked the logs and no certificated configured error. I have attached the logs for your review. I hope this helps you with apache ssl routnes.
>>
>> How do I configure a ssl certificate or does your routine automatically configure it?
>>
>>
>>
>>
>> ----- Original Message ----
>> From: ehcp.net <info@ehcp.net>
>> To: >
>> Sent: Mon, December 7, 2009 8:09:33 AM
>> Subject: Re: SSL Apache
>>
>> ehcp has link in options->"fix apache config with ssl"
>> this makes a quick&dirty setup, which generates a self-signed
>> certificate, then use that in apache configs.
>> That command make necessary changes in all ehcp config files related
>> to apache(apachetemplate and so on), then, applies that config to
>> apache, then reload apache. You can see exact list of operations done
>> in install_lib.php
>>
>> If something went wrong with your case, you need to check out the logs
>> as described in http://ehcp.net/?q=node/771
>> if you are not able to open https://yourserverip, then, most probably
>> something is wrong in apache configs.. you need to check errors in
>> logs, especially syslog and apache2/error.log
>> I cannot give more info unless I see those logs..
>>
>>
>> I may also try to help you by connecting to your server by ssh.
>>
>> I am sory about those many banners/ads. I will remove them as much as
>> I can. as you saw, I made login page quite clear with version 0.29.12
>> As somebody says, i think to leave a small "donate" button.. or just
>> like wikipedia, "Wikipedia is a non-profit project: please donate
>> today."
>>
>> see you,
>>
>>
>> On Mon, Dec 7, 2009 at 1:09 PM, wrote:
>>> Dear bvidinli;
>>>
>>> I downloaded your panel and it is excellent except for the banners which I will edit later. I am willing to keep some of them because they might help customers, however the hosting ads are not appropriate in the context of my company providing these services as well.
>>>
>>> I tried using your ssl appache setup but was not able to open anything with Firefox latest version. Any ideas as to what this could actually be? I believe your ssl setup generates an internal ssl or self generated ssl certificate. What does the user have to do in order to access the sight. I am using Ubuntu 9.10 latest version. I cannot open anything on my server.
>>>
>>> Sincerely,
>>>
>>>
Restored from old drupal forum, for user uid:1 username:ehcpdeveloper
You may reset your password to access your new account here.